|
 E-Z
Drill Plate PDF file - English
E-Z
Drill Plate PDF file - Spanish
E-Z
Drill Plate PDF file - Chinese
Get Up to Speed!
Increase Your Drilling
Speed and Feed Rates
Up to 30% for Carbide Drilling
with Sandmeyer E-Z Drill
Stainless Steel Plate
Sandmeyer Steel achieves
improved machinability through
a special ladle metallurgy of
molten steel, enriched with a
calcium treatment that controls
the size, composition and
distribution of oxide inclusions.
These inclusions are key to the
process - acting as lubricants
that make it possible for you to
significantly increase feed rates.
And E-Z Drill gives you the
same yield, tensile, elongation,
hardness, toughness and
corrosion resistance you get
from standard austenitic
stainless steels.
Heat exchanger tube sheet drilled
from Sandmeyer's E-Z Drill plate.
THICKNESSES & GRADES
E-Z Drill is stocked in thicknesses
of 3/8" (9.5 mm) to 6" (152.4 mm)
and in types 304, 304H, 304L,
316 and 316L.
MATERIAL CERTIFICATIONS
E-Z Drill can be certified to
ASTM, ASME and QQS-766
specifications.
INCREASED PERFORMANCE
If you're using carbide drilling
tools for drilling, reaming or
grooving holes, E-Z Drill makes
it possible to increase feed rates
by as much as 30% without
increasing drill wear.
Hole
Diameter |
Normal Rate |
EZ Drill Rate
|
1/2"
3/4"
1"
1-1/4"
1-1/2" |
2123 RPM - 16.9 IPM
1400 RPM - 11.2 IPM
1061 RPM - 8.5 IPM
850 RPM - 6.8 IPM
708 RPM - 5.6 IPM |
3032 RPM - 24.2 IPM
2000 RPM - 16.0 IPM
1516 RPM - 12.1 IPM
1213 RPM - 9.7 IPM
1011 RPM - 8.0 IPM |
Our drilling operations were completed on 304 straight grade and 304 E-Z Drill material using 3/4" diameter
carbide insert drills. The optimum performance came at 393 SFM. Drill inserts used in testing were manufactured
by a leading producer of carbide inserts.
|
|
