Stainless Steel Plate

Alloy 410 Stainless Steel Gate Valves

Used in a variety of industries, gate valves are best suited for applications where fluids or gases flow in a straight line and need minimum restriction. Applications that require the flow of heavy oils, light grease, cream, and other non-flammable liquids can benefit from using a gate valve as a shutoff device. Gate valves should only be used to permit or prevent the flow, not to regulate flow speed, as the valves are typically designed to be fully opened or closed.

The properties and composition of the gate valve material is very important, especially since they are required to carry a range of liquids or gases that could affect certain substances. With the volume of liquid or gas flowing through a gate valve, they should be made of a high-strength, corrosion-resistant material. This is why Alloy 410 is an ideal choice.

Alloy 410 Stainless Steel Properties and Composition

Alloy 410 is a general purpose stainless steel with 12% chromium martensitic properties. Type 410 is made for working with a variety of liquid and gaseous substances because of its hardness and corrosion-resistant composition. The physical and mechanical properties of 410 stainless steel yield a number of fabrication options, such as heat treatment, hot and cold forming, machining, and welding.

Sandmeyer Provides Alloy 410 Stainless Steel

Alloy 410 is available through Sandmeyer Steel Company in thicknesses from 3/16” up to 4”. Those in the oil and gas, pharmaceutical, water and waste water treatment, infrastructure and dam gates, or marine industry, looking for the right material for an effective gate valve, can look no further than Sandmeyer Steel. To learn more about this material, click 410 stainless steel properties and click here to request a quote on pricing and delivery for type 410 stainless steel sheet and plate.

NOTE: The information and data in this product data sheet are accurate to the best of our knowledge and belief, but are intended for informational purposes only, and may be revised at any time without notice. Applications suggested for the materials are described only to help readers make their own evaluations and decisions, and are neither guarantees nor to be construed as express or implied warranties of suitability for these or other applications.

Associations and Accreditations

ASME         Metals Service Center Institute Member 2016     NIAC     Quality System Certificate     Pennsylvania Prosperity Project     Proud Member of the National Association of Manufacturers     Member Company of World Trade Center Greater Philadephia