We are in Great Shape!

Pieces cut this week on our new Jet Edge Waterjet. What can we cut for you?

Posted on: July 27, 2018    

Abrasive Waterjet Piece

A customer ordered this 3/4” thick 2205 Abrasive Waterjet spilt Impeller with bevels produced on Sandmeyer Steel Company’s Jet Edge Waterjet. The overall diameter is 124 inches.

Posted on: July 16, 2018    

Sandmeyer Family Picnic – Day at the Zoo

The Sandmeyer Steel Company Family Picnic was held this year at the Philadelphia Zoo on Saturday, June 9th complete with Lions, Tigers and Bears. Employees, Retirees and their families enjoyed eating hamburgers, hot dogs, chicken and of course walking around the Zoo looking at all the animals. The beautiful weather helped make this a great event for employees and their families.

Posted on: June 12, 2018    

We’re Geared up for your Waterjet requirements.

A customer ordered this stainless steel 99-1/2” OD load plate made of 1-1/4” thick 304L cut on one of our four (4) Abrasive Waterjet Machines. Sandmeyer has plates wide enough to provide this load plate in one piece and Abrasive Waterjets that can cut plates up to 120” wide.

Posted on: June 1, 2018    

Memorial Day

Happy Memorial Day from Sandmeyer Steel Company!

We celebrated the holiday will our annual company picnic. After the long weekend, we will resume operations Tuesday, 5/29.

 

 

 

Posted on: May 25, 2018    

No Matter How You Slice It We Can Do the Hole Job Better

Our customer, a process equipment manufacturer, ordered this stainless steel paddle made of 3/4” thick 316L with (35) 4.567” diameter holes and two double beveled edges.

Posted on: May 21, 2018    

Our Nickel is Adding Up.

Sandmeyer Steel Company Now Stocking Alloy 200/201 (UNS N02200/N022010) Commercially Pure Wrought Nickel Plate Through 1.00” (25.4mm)

 Sandmeyer Steel Company has added Alloy 200/201 (UNS N02200/N02201) commercially pure nickel to one of North America’s largest single-site nickel alloy plate inventory.

The alloys combine good mechanical properties with excellent resistance to many corrosive environments. They are dual-certifiable with the lower carbon 201 preferred for temperatures above 600°F (315°C).

Alloy 200/201 perform best in reducing environments such as caustic soda and other alkalis, but can also be used under oxidizing conditions that produce a passive oxide film.

They are used extensively for missile components, chemical and petrochemical processing, food processing, marine service and water treatment.

Plate thicknesses are available from .1875” (4.8mm) through 1.00” (25.4mm) from your one-stop shop source for value-added plate products.

Posted on: May 16, 2018    

Earth Day 2018

As part of our mission statement of “Making significant contributions to the communities in which we work and live,” our Sandmeyer Serves team partnered with Friends of Pennypack Park on Saturday April 28th  to help with their Earth Day 2018 clean-up of our community parks and recreation centers. Employees and their families donated their time to clean a portion of the park located in the “Little City” section of Philadelphia.

Pennypack Park was established to insure the protection of Pennypack Creek and the preservation of the surrounding land. The park consists of 1,600 acres of woodlands, meadows, wetlands and fields.

Thanks to the team for your hard work and to the Friends of Pennypack Park for the opportunity to do service!

Posted on: April 30, 2018    

316L Used in Pressure Vessel Industry

Our customer, a pressure vessel manufacturer, ordered this 19” OD x 10-1/2” ID made of 4-3/8” thick 316L machined all over ring with, raised face, counterbored, drilled and tapped with (16) threaded 7/8” diameter holes 2” deep with a serrated spiral finish. All our products are manufactured to customer specifications from our in-house capabilities.

Posted on: April 23, 2018    

More Simple Math

What happens when you take a blank disc of 316L Stainless Steel and run it through our super-fast Quickmill Annihilator machine? This piece that we did recently for a fabricator customer. This unusual shape was drilled quickly and accurately on our Annihilator machine. Sandmeyer is always up for a challenge when it comes to tight timelines and complex shapes!

Posted on: April 10, 2018